|
Welcome to Graveyardskulls.com!!!
NEW SKULL DESIGN USING RACK AND PINION!!!
The new gear driven
skull is true control motion. That is to say, there are no conflicts
between the axis movements. Each axis is controlled by a servo
attached to a rack and pinion system. This system moves the skull in a
very lifelike manner. The skull uses HITEC and FUTABA servos. All
the parts are CNC machined and held to tight standards. These tight
standards ensure when the product is assembled, routines are easily
interchangeable. This makes it easy to move your skull around or
replace skulls with no down time on programming. We also
incorporate ease of repairs; if a servo fails, its very easy to
replace and can be done in minutes. This prevents long down
times!
The skull is sold
assembled with the eye kit and includes one routine of your choice. An
option is our quick cable release system.
The
quick release
cable system consists of two 15’ wire looms that snap into the base of
the skull. One wire loom controls the eyes and the other the axis
movements. Servo connectors are attached to the other end. They are
easily identifiable as to where they are to be plugged into the
controller board.
We also do custom
blanks for your own application. If you wish to use our patent
pending RP system in your own application or skull, we can build these
on 9" or 12" cast acrylic squares. All you have to do is cut it
out to fit your needs. It does not include the eye kit.
Contact us for a quote!
Shipping cost can be
found here: shipping cost.
Skulls do not include servo leads, controller card, and power
supplies. These items can be purchased separately.
LINDBERG SKULL
v
RP
LINDBERG ASSEMBLED SKULL $500
OR WITH QUICK RELEASE $600
This skull uses the LINDBERG skull and 425 servos.
o
Comes with a
3
year warranty. See warranty limitations for additional information.
o
15% cancellation
fee. There will be no refunds once in production!
o
Please allow 5-8 weeks for delivery.
v
RP GYS
ASSEMBLED SKULL $525
OR WITH QUICK RELEASE $625
This skull uses the GYS skull and uses the 625 servo for the tilt.
o
Comes with a
3
year warranty. See warranty limitations for additional information.
o
15% cancellation
fee. There will be no refunds once in production!
o
Please allow 5-8 weeks for delivery.
ACCESSORIES
v
POWER KIT:
CONTROLLER CARD, 6’ SERVO LEADS, POWER SUPPLIES, and ONE ROUTINE of
YOUR CHOICE: $100
For technical issues
regarding GYS products to include building, programming, or anything
else, please
post these type of questions on the forum. We will respond to them
there! We will no longer be responding to emails for these types
of questions. Status of order, or sales questions can be emailed to
sales@graveyardskulls.com.
We will not be taking any
orders after August 9, 2010. All orders must be paid prior to this
date or they will be cancelled. Orders placed in August will not be
shipped until late September.
| 
STORE