Our lifter page is current under development. We will have it posted February 2, 2010.  Please check back then.

Our lifters were developed by understanding haunt requirements and 15 years of experience.  Two of our biggest concerns was storage and ease of setup.  Our lifters accomplished both, and at a reasonable cost. 

Storage is a just a matter of removing the pin from the base frame, disconnect the air lines from the cylinder and pulling up and out the upper lifter receiver.  Instead of having a 3 foot by 2 1/2 foot prop, its now only 6" high and easy to store.

Setup only takes minutes; place upper receiver into the lower receiver frame, insert the quick release pin to secure receivers, attach airlines, power, and controller lines, affix prop, adjust air requirements, and prop is ready to use.

We offer three types of lifers: flat raiser, vertical lifter, and scissor extenders.  

The flat lifter is great for casket and other props where you need the prop to lay flat and then pop up quickly to provide that perfect scare. This prop can lift props weighing up to 6-12lbs. 

Our vertical lifter line comes in three configurations; small, medium, and heavy.  All lift props into the air from behind the gravestone or other prop. 

• The small is 24" tall and can lift a prop 48" into the air.  Weight limit is 10 lbs.
• The medium lifter is 36" tall and can lift a prop up to 60" into the air. Weight limit is 15 lbs.
• The heavy lifter is 36" tall and can lift a prop up to 72" into the air. Weight limit is 15-20 lbs.

All of our lifters require air to run them.  Your compressor should be able to supply PSI at 80 lbs.  We recommend you not go beyond this. 

Our scissor lifters come in two configurations, light and heavy.  All extend the prop outward or inward. 

• The light scissor lifter extends your prop out approximately 36". Weight limit is 10 lbs max.
• The heavy scissor lifter extends your prop out approximately 72". Weight limit is 10 lbs max.

As with all pneumatic props, your dealing with compressed air.  Compressed air can accelerator your prop to speeds that will do major bodily harm or even be FATAL.   EXTREME CAUTION WITH PLACEMENT, SETTING UP, ADJUSTING, SECURING THE PROP, AND SHOW ARE A MUST. ITS HIGHLY RECOMMEND YOU KEEP YOUR AUDIENCE AND OTHER STAFF MEMBERS AT LEAST 5' AWAY FROM THE PROPS MOST EXTENDED REACH.   IF PROP IS DAMAGE DO NOT USE.

For technical issues regarding GYS products to include building, programming, or anything else, please post these type of questions on the forum. We will respond to them there!  We will no longer be responding to emails for these types of questions. Status of order, or sales questions can be emailed to sales@graveyardskulls.com.

We will not be taking any orders after August 9, 2010.  All orders must be paid prior to this date or they will be cancelled.  Orders placed in August will not be shipped until late September.   

  Contact Us