*urgent question* Power suppliers from robot-shop.ca

[Hugo_Peters]

(02-22-2010 07:54 PM)HalloweenBob Wrote:  Found some even cheaper.

Check these out:

5 VDC 11 Amp Power supply $6.00 USD (Enough current for 22 servos) Works with 240VAC.

http://www.allelectronics.com/make-a-sto...PLY/1.html


8.4 VDC 0.6Amp Power supply (Will need a Euro Adapter) Works with 240VAC. $4.00 USD
(This is for the VL input. It's fine that it is not 9 VDC. It can be anything from 6 to 9 so 8.4 is fine!)

http://www.allelectronics.com/make-a-sto...Y/-/1.html


It is a legit company. I have bought from them many times both online and in storefront. I buy from them personally and for the College I work for.

There you go! Everything you need for $10.00 US Dollars plus shipping.

On the 5VDC supply, you may have to solder wires to pins on the board for input/output or you can get a matching plug from the same company and make a connector.

If you can't figure out how to do either of those things, let me know and I will make you the connector and mail it to you.

I am going to buy this all today, so I think I get it in a few weeks, when I can't figure out I will ask it

THANKS FOR ALL THE INFORMATION!!!!

---

(02-22-2010 11:40 PM)Hugo_Peters Wrote:  

(02-22-2010 07:54 PM)HalloweenBob Wrote:  Found some even cheaper.

Check these out:

5 VDC 11 Amp Power supply $6.00 USD (Enough current for 22 servos) Works with 240VAC.

http://www.allelectronics.com/make-a-sto...PLY/1.html


8.4 VDC 0.6Amp Power supply (Will need a Euro Adapter) Works with 240VAC. $4.00 USD
(This is for the VL input. It's fine that it is not 9 VDC. It can be anything from 6 to 9 so 8.4 is fine!)

http://www.allelectronics.com/make-a-sto...Y/-/1.html


It is a legit company. I have bought from them many times both online and in storefront. I buy from them personally and for the College I work for.

There you go! Everything you need for $10.00 US Dollars plus shipping.

On the 5VDC supply, you may have to solder wires to pins on the board for input/output or you can get a matching plug from the same company and make a connector.

If you can't figure out how to do either of those things, let me know and I will make you the connector and mail it to you.

I am going to buy this all today, so I think I get it in a few weeks, when I can't figure out I will ask it

THANKS FOR ALL THE INFORMATION!!!!

Euhm new problem here

I can´t choose Netherlands from the country list....

I have mailed them but they doesn't answer...

[HalloweenBob]

I just called them and asked how to get something shipped to you in the Netherlands.

They say that they do that all the time. All you have to do is send them an email.

In the email, tell them the address you need it shipped to, your name, and the quantity and part numbers of the items that you want.

They will email you back with a shipping quote and payment instructions.

The person I spoke with by phone was Morella Goddard. She is already aware that you want to place an order, so email her directly at:

mgoddard@allcorp.com

Include the information she needs and she will tell you how to proceed.

[Hugo_Peters]

(02-23-2010 07:42 AM)HalloweenBob Wrote:  I just called them and asked how to get something shipped to you in the Netherlands.

They say that they do that all the time. All you have to do is send them an email.

In the email, tell them the address you need it shipped to, your name, and the quantity and part numbers of the items that you want.

They will email you back with a shipping quote and payment instructions.

The person I spoke with by phone was Morella Goddard. She is already aware that you want to place an order, so email her directly at:

mgoddard@allcorp.com

Include the information she needs and she will tell you how to proceed.

Thank you SO much!!

*you're a hero *